Telecommunications equip.
01101 - Communications module VCL03C02
The VCL03C02 communications module converts the Serck telemetric protocol for transmission by the radio net using retransmission.
01105 - Communications Module VCLX24C01
The VCLX24C01 communications module converts the Serck telemetric protocol for transmission by the radio net using retransmission. The module incorporates a serial port ComLoc (9-pin Canon connector) and a serial port ComInt (25-pin Cannon connector), through which it communicates by means of Serck protocol, a galvanically isolated serial port ComExt (9-pin Cannon connector), to which the radio station is connected, and a serial port Service (9-pin Cannon connector), which is used for monitoring data transmitted via the ComExt port.
01107 - Communications module X18
The X18 communications module is designed for connecting RS232 interface with four other ports. Two ports are RS232 and one galvanically isolated RS485. The fourth port has RS232 signal level and serves for the connection to a host PX station.
01109 - Ethernet communications module VCLX24NET
The VCLX24NET board provides a link between an RS232 interface and 10/100 Mbps auto-sensing Ethernet interface. Ready-to-use TCP/IP firmware for fast integration. The board is primarily intended for usage in conjunction with Serck Controls PX24 outstation board. The board can be mounted on the DIN rail holder or directly to the station.
01111- Communications module GPRS VCLX24GPRS01
The communications card enables GPRS communication in Serck Controls stations.
01570 - Power supply VCL01M
The VCL01M power supply is a microprocessor controlled power supply designed for power supplying the equipment which must remain powered even after a failure of the system voltage. When the battery pack is in use (mains off) the power supply monitors its voltage and disconnects the output when the voltage drops below a specified value in order the battery pack not to be damaged. The output voltage will be also disconnected for a pre-determined time if the Imax current is exceeded. The output voltage can be set from 5 V to 28 V.
| Basic parameters: | |
| Supply: | 230V/50Hz ±15% |
| Max. constant power consumption: | 28W |
| Max. peak power consumption: | 35W |
| Max. output current (Radio): | > 2A |
| Max. charging current (AKU): | > 2A |
| Regulated output voltage: | 5 to 28V |
| Dimensions (wxhxd): | 84x165x112mm |
| Weight: | 1.1kg |
| Fixation: | DIN rail |
| Cover: | IP30 |
02361 - Converter f/I CFI 2
I M1 EEx ia I
The converter is designed for converting input pulses with maximum frequency 1KHz into the current ranging from 4 to 20 mA. Typical application is sensing output pulses of flow meters or tachometers and converting the flow rate or revolutions into current.
Files for downloading:
| Name | Description | Release date | File | |
|---|---|---|---|---|
| FTZÚ 06 ATEX 0153 | ES Certifikát o přezkoušení typu | 27.07.2007 |
PDF (543.1 kB)
|
|
| FTZÚ 06 ATEX 0153 | EC-Type Examination Certificate | 27.07.2007 |
PDF (543.3 kB)
|
|
| NKO20060298/1/F | Návod k obsluze převodník CFI 2, 3 CZ | 13.11.2009 |
PDF (496.3 kB)
|
80004 - Telemetric station TSX24.X
The station is a compact telemetric station with low consumption, designed for monitoring, local and distance control of technological objects.
90007 - Lightning arrester ELBJ 1
The lightning arrester is designed to protect HF circuits in the 50 to 1000 MHz frequency range while transmitting power up to maximum 50W.
Files for downloading:
| Name | Description | Release date | File | |
|---|---|---|---|---|
| 90007-01-001 Bleskojistka | Technický list | 01.12.2011 |
PDF (32.6 kB)
|